68
4.6.7.d. SSH Server Configuration
On the System Security Configuration Menu, pressing "H" opens the SSH Server
Configuration screen, as shown in Fig. 4-6-15. On this screen, you can set SSH
server.
Fig. 4-6-15 SSH Server Configuration
Screen Description
SSH UI Idle
Timeout:
Displays the idle timeout settings (in minutes) for terminating a
SSH-connected session if no input is made.
The factory default setting is 5 minutes.
SSH Auth. Idle
Timeout:
Displays the time to wait for a response to SSH authentication.
The factory default setting is 120 seconds.
SSH Auth.
Retries Time:
Displays the number of times of SSH authentication.
The factory default setting is 5.
SSH Server:
Displays the SSH access settings.
'Disabled' is the factory default setting.
Enabled(SSH)
Access is enabled.
Disabled
Access is disabled.
SSH Server key: Displays the SSH server key status.
Key exists.
The server key exists.
Key does not exist.
The server key does not exist.
PN27089K/PN27089KA Local Management System
Basic Switch Configuration -> SSH Server Configuration
SSH UI Idle Timeout: 60 Min.
SSH Auth. Idle Timeout: 120 Sec.
SSH Auth. Retries Time: 5
SSH Server: Disabled
SSH Server key: Key exists.
-------------------------------- <COMMAND> -----------------------------------
[G]enerate SSH Server key Enable/Disable SS[H] Server
Set SSH UI Time [O]ut Set SSH [A]uthentication Time Out
Set SSH Authentication [R]etries Time [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
