63
Available commands are listed below.
E Set Enable/Disable of access limitation via Telnet.
E Set access limitation from Telnet to Enable.
D Set access limitation from Telnet to Disable.
A Set an IP address to be permitted. Five ranges can be set up.
Press "A." The command prompt changes to "Enter IP address entry number>." Enter an
IP address entry number between 1 and 5. The command prompt changes to "Enter IP
address>." Enter an IP address to be permitted. If IP address is correct, the command
prompt changes to "Enter subnetwork mask>." Enter a range of IP address to permit
accessing with subnet mask format.
(Setting example)
No.
IP Address
Subnet Mask
Access permitted IP Address
------
-----------------------
------------------------------ ----------------------------------------------------
1
192.168.1.10
255.255.255.255 192.168.1.10
(Only one unit can be accessed)
2
192.168.1.20
255.255.255.254 192.168.1.20, 192.168.1.21
(Two units can be accessed)
3
192.168.2.1
255.255.255.128 192.168.2.1 to 192.168.2.127
(127 units can be accessed)
4
192.168.3.1
255.255.255.0
192.168.3.1 to 192.168.3.254
(254 units can be accessed)
D Delete a range of IP address that has been set up.
Press "D." The command prompt changes to "Enter IP address entry number>." Enter an
IP address entry number to delete.
M Change a range of IP address that has been set up.
Press "M." The command prompt changes to "Enter IP address entry number>." Enter
an IP address entry number between 1 and 5. The command prompt changes to "Enter
IP address>." Enter an IP address that has been set up. The command prompt changes
to "Enter subnetwork mask>." Enter a range of IP address to permit accessing with
mask.
Q Return to the previous menu.
