Panasonic Section 700 Скачать руководство пользователя страница 69

Страница: 69 / 289

Chapter 2. System Features

Section 700 Operation

Interface

(CPC-B Version 4.0 or higher)

Description

The

Interface is a digital trunk card that provides twenty-four 64 kbps

channels, for a total transmission rate of 1.544 Mbps.

lines can be leased

from local exchange carriers and long-distance carriers.

The DBS

Interface supports the following options:

SF or ESF Framing Formats

Either super frame (SF) or extended super frame (ESF) formats can be used
with the DBS

The superframe consists of 12 frames, with each

including 193 bits.

Each frame is separated by a framing bit.

An extended

super frame consists of 24 frames, double the length of the super

frame (SF) format. ESF also supports monitoring and maintenance

capabilities that are not available with the SF format.

Flexible Trunk Signaling Modes

The

Interface provides the following

signaling modes. The

signaling modes can be assigned on a per-channel basis:

Loop start

Ground start

E&M.

Related Programming

(System):

Settings (all)

FF2 (Trunks): Trunk Type

FF2 (Trunks): Trunk Port Class

FF3 (Extension): Station Port Class

Hardware Requirements

The following hardware is required to install a

in a single cabinet:

Содержание Section 700


































































































































































































































































































Результаты поиска

Содержание Section 700

Отзывы:

Panasonic Section 700, Операция, Страница: 69 / 289

Результаты поиска

Содержание Section 700

Отзывы: