manualshive.com logo in svg

Panasonic Section 700, Операция, Страница: 152 / 289

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 152

Chapter 4. Key Telephone Features

Section 700   Operation

With CPC-A and CPC-B Version 1 .O, a maximum of two attendants can be
assigned. Beginning with CPC-B Version 2.0, up to four attendants can be
assigned.

Operation

1.

Pick up the handset or press 

ON/OFF.

The phone issues intercom dial tone.

2. 

Press 

l 

“Talk-EXT 100” appears on the display if your extension is set for

Voice Calling.

l 

“Call-EXT XXX” (where “XXX” is the extension) appears on the

display if your extension is set for Tone Calling.

Related Programming

l 

 (System): Second Attendant Position

l 

FFI (System): Third Attendant Position

l 

 (System): Fourth Attendant Position

l 

 (System): Attendant Transfer Extension

l

FF6 (Names and Messages): Extension Name

Considerations

l

If the Attendant‘s name has been stored it appears on the display instead of
the 

Содержание Section 700


































































































































































































































































































Отзывы:

Нет отзывов