manualshive.com logo in svg

Panasonic Section 700, Операция, Страница: 254 / 289

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 254

Chapter 6. SLT Features

Section 

700   Operation

Considerations

l

You cannot break in on three-party conference calls.

l

The default for the override alert tone is “off.” If the override alert tone is
enabled, the tone will be sent to both parties when a 

 is overridden.

Call Forwarding

(All Versions)

Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail. All versions of the DBS provide call
forwarding; however, some call forwarding enhancements are not available
with earlier versions. The following table shows the call forwarding features
available with each release.

Table 6-3. VRS 

 Forwarding features

 Feature

Availability

I

Call Forwarding--All Calls

 

 Forwarding--No Answer

Cal 1 Forwarding--Busy

, 

 Forwarding--Busy/No Answer

 Call Forwarding--External

All versions

CPC-AI1 and CPC-B Version 

2.0

or higher

All versions

All versions

CPC-A, CPC-AII prior to 7.0 and
CPC-B prior to 7.0. Beginning

with CPC-AII and CPC-B Ver-
sion 7.0, all forwarding types (All
Calls, No Answer, Busy, Busy/No
Answer) allow call forwarding

outside 

-- eliminating the need for

Call Forwarding--External.

 and CPC-B Version 3.1

or higher

 Permanent Cal 1 Forwarding

Call Forwarding--All Calls. 

When this feature is activated, all incoming

calls to an extension are forwarded immediately.

Call Forwarding--No Answer. 

When this feature is activated, an

unanswered call rings until the Call Forward No Answer timer expires. When
the timer expires, the unanswered call is forwarded.

Call Forwarding--Busy. 

When this feature is activated, all incoming calls

to a busy extension are forwarded to a designated extension.

-- -- 

 Issued 

Содержание Section 700


































































































































































































































































































Отзывы:

Нет отзывов