Panasonic Section 700, Операция, Страница: 169 / 289

Section 700 Operation
Chapter 4. Key Telephone Features
2. Press the REDIAL key.
The last number dialed appears on the display.
3. Complete the call and replace the handset.
The line key LED changes from green to red and then goes off.
Considerations
l
If the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the REDIAL key at the busy tone. You can then redial the last
number dialed.
l
The Last Number Redial feature can redial a nurnber up to sixteen digits
long.
l
A maximum of five chained Speed Dialing codes can
be
redialed. See
“One-Touch Keys” on page 4-73 for more information.
Line Appearances
(All Versions)
The DBS provides up to four types of line appearances, depending on the
CPC version used.
The following table summarizes how each type of line appearance is used:
Table 4-7. and ML key definitions
LF
Definition
keys provide one-touch dialing, direct station selection .
(DSS), and busy lamp fields (BLF) for extensions.
Direct Line (DL)
Appearances
ti-CO (MCO)
Appearances
Multi-Line (ML)
Appearances
DL keys are used to originate and receive calls over specific trunk
numbers.
keys are used to originate and receive CO calls.
ML keys are used to originate and receive CO line calls and intercom
calls.