Panasonic Section 700 Скачать руководство пользователя страница 38

Страница: 38 / 289

Section 700 Operation

Chapter 2. System Features

(System): DISA Outbound Call ID Code 1

(System): DISA Outbound Call ID Code 2

FF2 (Trunk): DISA Auto Answer

FF2 (Trunk): DISA Start

FF2 (Trunk):

End Time

To program an incoming code from an attendant phone:

In addition to the DISA ID Setting in

the following procedure can be

used to program an incoming code.

1. Press the ON/OFF key.

The phone issues intercom dial tone.

The ON/OFF LED lights.

2. Press the CONF key.

3. Dial

4. Enter the DISA code.

5. Press the HOLD key.

6. Press the ON/OFF key.

The ON/OFF LED goes off.

Hard ware Requirements

card is required for DISA. The

card is required to detect

DTMF tones entered via the DISA connection.

Considerations

DISA can be used to access extensions as well as outside numbers.

Once an incoming DISA code is entered, you cannot blank it out without
entering the programming mode.

Busy override cannot be used for a DISA line.

. With CPC-A and CPC-I3 Versions 2.0 to 2.1, DISA calls cannot access

hunt groups.

DBS-70-700

DBS Manual Issued

Page 2-23

Содержание Section 700


































































































































































































































































































Результаты поиска

Содержание Section 700

Отзывы:

Panasonic Section 700, Операция, Страница: 38 / 289

Результаты поиска

Содержание Section 700

Отзывы: