Panasonic Section 700, Операция, Страница: 182 / 289

Chapter
4. Key Telephone Features
Section
700 Operation
l
The Talk Back key flashes red.
4. Make your announcement.
To answer an OHVA:
1. Press the Talk Back key must be programmed in an FF key).
The Talk Back key flashes red.
2. To return to the previous call, press the Talk Back key again.
To transfer a call using OHVA
1.
Press the
HOLD
key to place the call to be transferred on hold.
2. Dial the number of the extension to which the call will be transferred.
the extension is already engaged in a call. your phone issues busy tone.
3. Press and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH
key to cancel the transfer.
If the transferred call is accepted, and Transfer is enabled for
your extension, hang up. If Transfer is not enabled, press
PROG
and then hang up.
Note: Attendant console phones transfer by pressing the
RELEASE
key.
To answer a call after It has been announced using OHVA:
1. Replace the handset.
Your extension rings.
2. Pick up the handset.
Related Programming
l
FFI (System): Extension Class of Service Setting and CPC-B
3.1 or higher)
l
FF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B 3.1 or higher)
l
FF3 (Extension): Call
4-72
DBS Manual Issued
DBS-70-700 .