manualshive.com logo in svg

Panasonic Section 700, Операция, Страница: 122 / 289

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 122

Chapter 4. Key Telephone Features

Section 700   Operation

Call Forward Type

 Code 

0 answer

 

 

I

“ENTER FWD 

 appears on the display.

4.

Enter the number of the extension you want to receive your calls.

5.

Press the 

ON/OFF 

key.

l 

The 

 

LED lights.

l 

“FWD-EXT 135” appears on the 2nd line of the display if extension

135 is selected. If a name is assigned to the extension, the name appears

instead of the extension number.

To activate Call Forwarding-External (prior to Version 7.0):

Note: 

To forward to an outside number, the trunk selection and

forwarding number must first be programmed into personal or system
speed dialing. With CPC-A or CPC-B Versions prior to 2.0, you can only
forward to an outside number that is programmed into personal speed dial
number 99. With CPC-AI1 and CPC-B 2.0 or higher, you can forward to
any speed dial number (system or personal). See “Speed Dialing” on page
4-87 for more infonnation on programming personal speed dial numbers.

1.

Press the 

 

key.

l 

The phone issues intercom dial tone.

l 

The 

ON/OFF 

LED lights.

2. Dial “72.”

“ENTER FWD CODE” appears on the display.

3. 

Dial 723.

“ENTER FWD 

 appears on the display.

4.

Press 

AUTO 

plus the appropriate speed dial number.

5.

Press the 

ON/OFF 

key.

 

4 - I L

Содержание Section 700


































































































































































































































































































Отзывы:

Нет отзывов