manualshive.com logo in svg

Panasonic Section 700, Операция, Страница: 209 / 289

Поделиться
Скачать
Panasonic Section 700 Скачать руководство пользователя страница 209

Section 700   Operation

Chapter 4. Key Telephone Features

Programming

The Voice Mail Transfer Key may be assigned from a phone or through
system programming.

To assign a Voice Mail key from a phone:

1.

Press the ON/OFF key.

l 

The phone issues intercom dial tone.

l 

The  ON/OFF  LED lights.

2. 

Press  PROG.

3.

Press the FF key to be assigned as a Voice Mail Transfer Key.

4.

Press  CONF AUTO AUTO.

Enter the Voice Mail pilot number.

6.

Enter any special codes required by the voice mail system.

Note: The length of the Voice Mail pilot number and special codes
combined cannot exceed six digits. If the VM number and the special
codes require more than six digits, assign the special codes to a personal
or system speed dial number and enter AUTO followed by the speed dial
bin number.

7.

Press the HOLD key.

8.

Press the ON/OFF key.

l 

The ON/OFF LED goes off.

 ted Programming

l

 (FF Key Programming): FF Key Assignments

Considerations

Key Assignment. 

The 

 key can be assigned to any key phone, 

72 or 

 The 

 key cannot be assigned to a One-Touch key.

Transfers. 

The 

 key can be used to transfer intercom as well as CO

calls to a voice mailbox.

 Manual   Issued   

4-99

Содержание Section 700


































































































































































































































































































Отзывы:

Нет отзывов