Panasonic Section 700 Скачать руководство пользователя страница 164

Страница: 164 / 289

Chapter 4. Key Telephone Features

Section 700 Operation

Handsfree Operation

(All Versions)

tion

Handsfree operation is available with all speakerphones (but not the

This type of operation allows you to use all available DBS features without
lifting the handset.

Operation

To initiate handsfree operation, press the ON/OFF key. This takes the phone

and provides access to the full range of calling features.

Considerations

Stay within three feet of the microphone.

The MUTE

feature controls the handsfree microphone but not the handset.

The MUTE

feature can be selected from the Menu screen on large display

phones. With other DBS key phones, the MUTE function is assigned to a
fixed key.

Headset Operation

(All Versions)

Description

Headset operation allows you to handle calls with a headset instead of with
the handset or speakerphone.

Operation

Pick up the handset or press ON/OFF.

2. Dial

If headset mode is already on, these steps turn it off; if headset mode is

off, these steps turn it on.

Содержание Section 700


































































































































































































































































































Результаты поиска

Содержание Section 700

Отзывы:

Panasonic Section 700, Операция, Страница: 164 / 289

Результаты поиска

Содержание Section 700

Отзывы: