42
4.3.4.
Port Configuration Power Saving
In this Switching Hub, it is possible to reduce power consumption by utilizing our
original function "MNO series power saving mode" that detects the connection sta
-
tus of ports automatically and saves power consumption to minimum, and the
Energy Efficient Ethernet (hereinafter referred to as EEE) of IEEE802.3az respec
-
tively.
In addition, the MNO series power saving mode supports two modes: "Half mode"
to prioritize connection with other devices and "Full mode" to save more power
consumption.
On the Basic Switch Configuration Menu, pressing "o" opens the Port Configura
-
tion Power Saving screen, as shown in Fig. 4-14. On this screen, you can configure
port status display settings and various power saving mode settings.
PN25249 Local Management System
Basic Switch Configuration -> Port Configuration Power Saving Menu
Port Link Trunk Type Mode Power-Saving EEE(802.3az)
---- ------ ----- ------ ----------- ------------ -------------
1 Down --- 1000T Auto Half Enabled
2 Down --- 1000T Auto Half Enabled
3 Down --- 1000T Auto Half Enabled
4 Down --- 1000T Auto Half Enabled
5 Down --- 1000T Auto Half Enabled
6 Down --- 1000T Auto Half Enabled
7 Down --- 1000T Auto Half Enabled
8 Down --- 1000T Auto Half Enabled
9 Down --- 1000T Auto Half Enabled
10 Down --- 1000T Auto Half Enabled
11 Down --- 1000T Auto Half Enabled
12 Down --- 1000T Auto Half Enabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set Power [S]aving Mode Set [E]EE Status
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-14 Port Configuration Power Saving Menu
Screen Description
Port
Displays the port number.
Link
Displays the current link status.
Up
A link has been established successfully.
Down
A link has not been established.
Trunk
Displays the group number for a trunked port.
Type
Displays the port type.
100TX
The port type is 10/100BASE-TX.
1000T
The port type is 10/100/1000BASE-T.
