115
Available commands are listed below.
I
Set the IP address of the target of the ping.
Press "I." The command prompt changes to "Enter new Target IP Address >." Enter the IP
address.
N
Set the number of times of ping.
Press "N." The command prompt changes to "Enter new Request Times >." Enter the num
-
ber of times between 1 and 10.
T
Set the time before timeout occurs.
Press "T." The command prompt changes to "Enter new Timeout Value >." Set the time
between 1 to 5 seconds.
E
Execute the ping command or clear the display.
Press "E." The command prompt changes to "Execute Ping or Clean before Ping Data (E/
C)>." Press "E" to execute ping. Press "C" to only clear the display.
S
Cancel the ping command.
Press "S" or "Ctrl+C" during the ping execution to cancel it.
Q
Return to the parent menu.
PN25249 Local Management System
Switch Tools Configuration -> Ping Execution
Target IP Address: 192.168.1.100
Number of Requests: 10
Timeout Value: 3 Sec.
=============== Result ===============
No. 1 6 ms
No. 2 5 ms
No. 3 6 ms
No. 4 6 ms
No. 5 5 ms
No. 6 7 ms
Waiting for response...
-------------------------------- <COMMAND> -----------------------------------
Set Target [I]P Address [E]xecute Ping
Set [N]umber of Requests [S]top Ping
Set [T]imeout Value [Q]uit to previous menu
S or Ctrl-C Stop ping function
Fig. 4-42 Display during Ping Execution
