57
4.3.8.b.
Display of MAC Address Table by Port
On the Forwarding Database Information Menu, press "P." The command prompt
changes to "Enter Port Number>." Specifying a port number opens the Display
MAC Address by Port screen as shown in Fig. 4-7. On this screen, you can display
the MAC address table by port.
PN25249 Local Management System
Forwarding Database Menu -> Display MAC Address by Port
Age-Out Time: 300 Sec. Selected Port: 1
MAC Address Port
----------------- ----
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [S]elect Port No
[P]revious Page [Q]uit to previous menu
Set [A]ge-Out Time
Command>
Enter the character in square brackets to select option
Fig. 4-7 Display of MAC Address Table by Port
Screen Description
Age-Out Time:
Displays the time to store the MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5 minutes).
Select Port:
Displays the selected port number.
MAC Address
Displays all the entries in the MAC address table.
Port
Displays the port to which the MAC address has been assigned.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next page.
P
Display the previous page.
Press "P" to display the previous page.
A
Set the time to store the MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter the age-out time
with a value of 10 to 1000000 (seconds).
S
Switching Hub the port to be displayed.
Press "S." The command prompt changes to "Enter Port Number>." Enter a port number you
wish to display.
Q
Return to the parent menu.
