102
On this screen, you can display two types of counter values: Values accumulated
after booting this Switching Hub (Fig. 4-33), and values accumulated after reset
-
ting the counters (Fig. 4-34). The values accumulated after booting the Switching
Hub are retained even after you reset the counters.
PN25249 Local Management System
Main Menu -> Statistics Menu
Port: 1 Refresh : 300 Sec. Elapsed Time Since System Reset: 000:00:00:00
<Counter Name> <Total> <Avg./s>
Total RX Bytes 0 0
Total RX Pkts 0 0
Good Broadcast 0 0
Good Multicast 0 0
CRC/Align Errors 0 0
Undersize Pkts 0 0
Oversize Pkts 0 0
Fragments 0 0
Jabbers 0 0
Collisions 0 0
64-Byte Pkts 0 0
65-127 Pkts 0 0
128-255 Pkts 0 0
256-511 Pkts 0 0
512-1023 Pkts 0 0
Over 1024 Pkts 0 0
-------------------------------- <COMMAND> -----------------------------------
[N]ext [P]revious [S]elect Port Re[f]resh [R]eset Since [U]p [Q]uit
Command>
Enter the character in square brackets to select option
Fig. 4-34 Display of Values Accumulated after Resetting the Counters
Screen Description
Port
Displays the port number.
Refresh
Displays the refresh interval. (The factory default setting is 300 seconds)
Elapsed Time Since
System Reset
Displays the time elapsed since resetting of the counters.
Counter Name
Displays each counter name.
Total
Displays each counter value.
Avg./s
Displays the average value per second of each counter.
R
Reset counter values.
Press "R." The counter values are reset and immediately changed to those accumulated
after resetting the counters.
F
Set the display refresh mode.
Press "F." The command prompt changes to "1 for start to refresh,2 for set refresh rate."
Press "1" to cancel the automatic refresh. Press "2" to change the refresh interval.
If you press "2", the command prompt changes to "Input refresh time>." Enter an integer
between 5 and 600 (seconds).
Q
Return to the parent menu.
