Panasonic PT-RQ35KU, Руководство по эксплуатации

Страница: 239 / 291

Chapter 7 Appendix — Technical information
ENGLISH - 239
Technical information
PJLink protocol
The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform
projector setting and projector status query operations from a computer.
Control commands
The following table lists the PJLink protocol commands that can be used to control the projector.
f
x characters in tables are non-specific characters.
Command Control details
Parameter/response
string
Remark
POWR Power supply control
0 Standby
1 Power on
POWR?
Power supply status
query
0 Standby
1 Power on
2 Preparing for switching off the projector
INPT Input selection
31 SDI1
32 SDI2
33 SDI3
34 SDI4
35 DIGITAL LINK
INPT? Input selection query
36 SLOT1-1 (input 1 of the Interface Board installed in <SLOT 1>)
*1
37 SLOT1-2 (input 2 of the Interface Board installed in <SLOT 1>)
*2
38 SLOT2-3 (input 3 of the Interface Board installed in <SLOT 2>)
*1
39 SLOT2-4 (input 4 of the Interface Board installed in <SLOT 2>)
*2
AVMT Shutter control 30 Shutter function disabled (shutter: open)
AVMT? Shutter status query 31 Shutter function enabled (shutter: closed)
ERST? Error status query xxxxxx
1st byte
Indicates fan errors, and returns
0 - 2.
f
0 = No error is
detected
f
1 = Warning
f
2 = Error
2nd byte
Indicates light source errors, and
returns 0 or 2.
3rd byte
Indicates temperature errors, and
returns 0 - 2.
4th byte Returns 0.
5th byte
Indicates filter errors, and returns
0 - 2.
6th byte
Indicates other errors, and returns
0 - 2.
LAMP?
Light source status
query
xxxxxxxxxxxx
1st number (1 - 5 digits): Light source 1 runtime
2nd number: 0 = Light source 1 off, 1 = Light source 1 on
3rd number (1 - 5 digits): Light source 2 runtime
4th number: 0 = Light source 2 off, 1 = Light source 2 on
INST? Input selection list query 31 32 33 34 35 36 37 38
39
―
NAME? Projector name query xxxxx
Returns the name set in [PROJECTOR NAME] of [NETWORK
SETUP].
INF1?
Manufacturer name
query
Panasonic Returns manufacturer name.
INF2? Model name query RQ32K Returns model name.
INF0?
Other information
queries
xxxxx Returns information such as version number.
CLSS? Class information query 1 Returns class for PJLink.
*1 When the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed, this corresponds to the input switch for the <SDI 1 IN>
terminal. Switching to the <SDI 2 IN/1 OUT> terminal or the <SDI 4 IN/3 OUT> terminal is not possible.
*2 When the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed, this corresponds to the input switch for the <SDI 3 IN>
terminal. Switching to the <SDI 2 IN/1 OUT> terminal or the <SDI 4 IN/3 OUT> terminal is not possible.