Panasonic PT-RQ35KU, Руководство по эксплуатации

Страница: 100 / 291

Chapter 4 Settings — [PICTURE] menu
100 - ENGLISH
[SYSTEM SELECTOR]
The projector will automatically detect the input signal, but you can set the system method manually when an
unstable signal is input. Set the system method matching the input signal.
1) Press
as
to select [SYSTEM SELECTOR].
2) Press the <ENTER> button.
3) Press
as
to select a system format.
f
Available system formats vary depending on the input signal.
Terminal System format
<DIGITAL LINK/LAN>
terminal, <HDMI IN 1>
terminal, <HDMI IN 2>
terminal, <HDMI IN 3>
terminal, <HDMI IN 4>
terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [AUTO], [RGB], or [YC
B
C
R
].
Other movie-based signals Select [AUTO], [RGB], or [YP
B
P
R
].
<DVI-D IN 1> terminal, <DVI-D
IN 2> terminal, <DVI-D IN
3> terminal, <DVI-D IN 4>
terminal
480/60i, 576/50i, 480/60p, or
576/50p signal
Select [RGB] or [YC
B
C
R
].
Other movie-based signals
Select [RGB] or [YP
B
P
R
].
<DisplayPort IN 1> terminal,
<DisplayPort IN 2> terminal,
<DisplayPort IN 3> terminal,
<DisplayPort IN 4> terminal
Movie-based signals
Select [AUTO], [RGB], or [YP
B
P
R
].
4) Press the <ENTER> button.
Note
f
For details of the types of video signals that can be used with the projector, refer to “List of compatible signals” (
x
page 255).
f
This may not function properly for some connected external devices.
f
The selection item for the input signal to the <HDMI IN 1> terminal and the <HDMI IN 2> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 1>.
f
The selection item for the input signal to the <HDMI IN 3> terminal and the <HDMI IN 4> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 2>.
f
The selection item for the input signal to the <DVI-D IN 1> terminal and the <DVI-D IN 2> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 1>.
f
The selection item for the input signal to the <DVI-D IN 3> terminal and the <DVI-D IN 4> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 2>.
f
The selection item for the input signal to the <DisplayPort IN 1> terminal and the <DisplayPort IN 2> terminal can be selected when the
optional Interface Board equipped with the DisplayPort input is installed in <SLOT 1>.
f
The selection item for the input signal to the <DisplayPort IN 3> terminal and the <DisplayPort IN 4> terminal can be selected when the
optional Interface Board equipped with the DisplayPort input is installed in <SLOT 2>.
f
For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SDI IN] (
x
page 119).
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f
Refer to [COLOR MATCHING] (
x
page 114).
2) Display the [PICTURE] menu.
f
Refer to “[PICTURE] menu” (
x
page 93).
3) Press
as
to select [PICTURE MODE].
4) Press
qw
to set [NATURAL].
5) Press
as
to select [COLOR].
6) Press the <DEFAULT> button on the remote control to set the factory default setting.
7) Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.