Panasonic PT-MZ13K, Руководство по эксплуатации

Страница: 195 / 248

Chapter 5 Operations — Using the information monitor function
ENGLISH - 195
5) Press
as
to select [DHCP].
f
The current setting is displayed.
6) Press the <ENTER> button.
f
Setting can be changed.
7) Press
qw
to switch the setting item.
f
The items will switch each time you press the button.
[ON]
Acquires the IP address automatically if a DHCP server exists in the network where the projector is to
be connected.
[OFF]
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY] if a DHCP server does not exist in
the network where the projector is to be connected.
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu → [NETWORK SETUP] → [DHCP]
r
Specifying the IP address
Set the IP address, the subnet mask, and the default gateway if a DHCP is not used.
1) Press
as
to select [SETUP].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select [NETWORK].
4) Press the <ENTER> button.
f
The detailed setting item is displayed.
5) Press
as
to select [IP ADDRESS], [SUBNET MASK], or [DEFAULT GATEWAY].
f
The current setting is displayed.
6) Press the <ENTER> button.
f
Setting can be changed.
7) Press
asqw
to enter the address.
f
Press
qw
to select the number to change, and press
as
to change the number.
8) Press the <ENTER> button.
f
The setting is reflected.
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu → [NETWORK SETUP] → [IP ADDRESS]/[SUBNET MASK]/[DEFAULT GATEWAY]
f
The number can be entered with the number (<0> - <9>) buttons on the remote control when the projector is in the standby status.
[STATUS] menu
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select an item.
Sub-menu item Overview
[PROJECTOR] Displays the information of the projector.
[INFO MONITOR]
Displays the setting information of the information monitor.
[NETWORK] Displays the setting information of wired LAN.
[VERSION] Displays the firmware version of the projector.