Panasonic PT-MZ13K, Руководство по эксплуатации

Страница: 146 / 248

Chapter 4 Settings — [PROJECTOR SETUP] menu
146 - ENGLISH
[INPUT] Currently selected input terminal
[SIGNAL NAME] Input signal name
[AC VOLTAGE] Input supply voltage
[INTAKE AIR TEMP.] Intake air temperature of the projector
[EXHAUST AIR TEMP.]
Exhaust air temperature of the projector
[SHUTTER] Status of the shutter ([CLOSE]: Shutter function enabled; [OPEN]: Shutter function disabled)
[OSD] Status of the on-screen display function ([ON]: Display; [OFF]: Hide)
[IP ADDRESS] IP address of the wired LAN
6) Press
qw
to switch the setting.
f
The items will switch each time you press the button.
[ON] Displays the items in the information monitor.
[OFF] Does not display the items in the information monitor.
f
Repeat Steps
5)
to
6)
until the desired display items are set.
Note
f
This can also be set with operation in the information monitor. For details, refer to “Using the information monitor function” (
x
page 190).
Setting the direction to display
Set the direction of the text to display in the information monitor.
1) Press
as
to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f
The [INFO MONITOR SETTING] screen is displayed.
3) Press
as
to select [DIRECTION].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Detects the orientation of the projector by the built-in angle sensor, and automatically sets the
direction of the text displayed in the information monitor. Set [AUTO] normally.
[NORMAL] Select this item when installing the projector on a desk, etc.
[FLIPPED]
Select this item when installing the projector with the top surface of the projector facing down such as
ceiling attachment.
Displays the text inverted upside down from when [NORMAL] is set.
Note
f
This can also be set with operation in the information monitor. For details, refer to “Using the information monitor function” (
x
page 190).
Setting the brightness of the information monitor
Set the brightness of the information monitor.
1) Press
as
to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f
The [INFO MONITOR SETTING] screen is displayed.
3) Press
as
to select [BRIGHTNESS].
4) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press
w
.
The information monitor becomes bright.
30 % - 100 %
(Factory default setting: 100 %)
Press
q
. The information monitor becomes dark.
Note
f
[BRIGHTNESS] is adjusted in increments of 10.
f
This can also be set with operation in the information monitor. For details, refer to “Using the information monitor function” (
x
page 190).