Panasonic PT-JW130FBE, Инструкция по эксплуатации (Функциональное руководство)

Страница: 85 / 217

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 85
Setting address for [WIRELESS LAN]
1) Press
as
to select [Art-Net].
2) Press
qw
to select [WIRELESS LAN].
3) Press the <ENTER> button.
f
The [Art-Net (WIRELESS LAN)] screen (1/2) is displayed.
4) Press
as
to select [DEVICE IP ADDRESS].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[2.x.x.x] Sets the IP address to 2.x.x.x automatically.
[10.x.x.x] Sets the IP address to 10.x.x.x automatically.
[MANUAL] Sets the IP address manually.
6) Press
as
to select each item, and change the settings according to the operation instructions of the
menu.
[NET] Enter the net setting of the control console to be connected to the projector.
[SUB NET] Enter the subnet setting of the control console to be connected to the projector.
[UNIVERSE] Enter the universe setting of the control console to be connected to the projector.
[START ADDRESS] Enter a start address where the projector processes Art-Net.
f
When [2.x.x.x] or [10.x.x.x] is selected in Step 5) , proceed to Step 8) .
7) Press
as
to select each item, and change the settings according to the operation instructions of the
menu.
[DHCP]
Set to [ON] when obtaining an IP address automatically using a DHCP server. Set to [OFF] when not
using a DHCP server.
[IP ADDRESS] Enter the IP address when not using a DHCP server.
[SUBNET MASK] Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY] Enter the default gateway address when not using a DHCP server.
[DNS1] Enter the primary DNS server address when not using a DHCP server.
[DNS2] Enter the secondary DNS server address when not using a DHCP server.
8) Press
as
to select [NEXT], and press the <ENTER> button.
f
The [Art-Net (WIRELESS LAN)] screen (2/2) is displayed.
9) Press
as
to select each item, and change the settings according to the operation instructions of the
menu.
[SSID] Enter the same string as the SSID registered to the access point.
[AUTHENTICATION]
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
Select this item when the authentication method of the access point
is Open System.
[SHARED]
Select this item when the authentication method of the access point
is Shared Key.
[WPA-PSK]
Select this item when the authentication method of the access point
is WPA-PSK.
[WPA2-PSK]
Select this item when the authentication method of the access point
is WPA2-PSK.
[WPA-EAP/WPA2-EAP]
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
[WPA-EAP]
Select this item when the authentication method of the access point
is WPA-EAP.
[WPA2-EAP]
Select this item when the authentication method of the access point
is WPA2-EAP.