Panasonic PT-JW130FBE, Инструкция по эксплуатации (Функциональное руководство)

Страница: 36 / 217

Chapter 2 Getting Started — Setting up
36 - ENGLISH
Setting up
Installing the projector
This projector is used in combination with the optional Ceiling Kit or Floor Stand Kit.
r
When installing on the ceiling
The optional Ceiling Kit is required to use the projector directly installed on a ceiling.
f
Be sure to use the Ceiling Kit specified for this projector.
f
For installation of the projector to a ceiling, refer to the Installation Instructions of the Ceiling Kit.
Attention
f
To ensure projector performance and security, be sure to ask your dealer or a building electrician for installing the projector to the ceiling.
r
When standing on the floor
The optional Floor Stand Kit is required to use the projector set on the floor.
f
Be sure to use the Floor Stand Kit specified for this projector.
f
For installation of the Floor Stand Kit to the projector, refer to the Operating Instructions of the Floor Stand Kit.
f
After installing the Floor Stand Kit, install the projector referencing “Projection dimensions” (
x
page 34).
Adjusting the projection position
Adjust the orientation of the main unit to adjust the projection position after installing the projector.
1) Loosen the fixing screws.
f
Loosen the rotating fixing screw and ball joint fixing screws (2 locations) using the supplied Allen wrench
(opposite side size 3.0 mm (1/8")).
Ball joint fixing screws
Pole
Rotating fixing screw