Panasonic PT-JW130FBE, Инструкция по эксплуатации (Функциональное руководство)

Страница: 44 / 217

Chapter 3 Basic Operations — Turning on/off the projector
44 - ENGLISH
Initial setting (standby mode)
Set the operation mode during the standby. The default setting is [ECO] that keeps power consumption low
during standby. If you use the network function during standby, set to [NORMAL]. If you want to keep the power
consumption low during standby, and to perform operation of power-on via wired LAN, set to [NETWORK]. Once
the initial setting is completed, setting can be changed from the [SETUP] menu → [ECO MANAGEMENT] →
[STANDBY MODE].
1) Press
qw
on the remote control to switch the setting.
3/4
< >
Please set the power setting at standby mode. Network
function will be restricted when it sets to ECO or Network.
INITIAL SETTING
STANDBY MODE ECO
CHANGE
SET
ENTER
2) Press the <ENTER> button on the remote control to perform next initial setting.
Note
f
The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu → [INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu
→ [DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with
the [SETUP] menu → [DATE AND TIME] after completing the initial setting.
1) Press
qw
on the remote control to switch the setting.
4/4
< >
Please set up a time zone according to the area of your
country or region.
INITIAL SETTING
TIME ZONE
2014/01/01
+09:00
LOCAL DATE
00:00:00 LOCAL TIME
CHANGE
SET
ENTER
2) Press the <ENTER> button on the remote control.
f
Confirm the setting value and complete the initial setting.
Note
f
In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.