Panasonic PT-JW130FBE Скачать руководство пользователя

Страница: 38 / 217

Chapter 2

Getting Started — Connecting

38 - ENGLISH

Connecting

Before connecting

Before connecting, carefully read the operating instructions for the external device to be connected.

Turn off the power of all devices before connecting cables.

Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.

When connecting a cable to a device connected to the projector or the projector itself, touch any nearby

metallic objects to eliminate static electricity from your body before performing work.

Do not use unnecessarily long cables to connect a device to the projector or to the projector body. The longer

the cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like an

antenna, it is more susceptible to noise.

When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in a

straight manner.

Acquire any connection cable necessary to connect the external device to the system that is neither supplied

with the device nor available as an option.

Some computer models or graphics cards are not compatible with the projector.

Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image

may not display properly.

Only HDMI signals can be input to the projector. Refer to

“List of compatible signals” (

page 215) for the

types of video signals that can be used with the projector.

Connecting example: External devices

Audio device

Computer for controlling the projector

Blu-ray disc player

Computer

Attention

When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially

available shielded cables.

Note

For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards

is used, images may be interrupted or may not be displayed.

The <HDMI IN> terminal of the projector can be connected to an external device with a DVI terminal by using an HDMI/DVI conversion

cable, but the projector may not project the image properly or function properly with some devices.

The projector does not support VIERA Link (HDMI).

If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate

the projector.

Содержание PT-JW130FBE


























































































































































































































Результаты поиска

Содержание PT-JW130FBE

Отзывы:

Похожие инструкции для PT-JW130FBE

Бренды по названию

Популярные бренды

Panasonic PT-JW130FBE, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание PT-JW130FBE

Отзывы:

Похожие инструкции для PT-JW130FBE

Бренды по названию

Популярные бренды