Panasonic PT-JW130FBE, Инструкция по эксплуатации (Функциональное руководство)

Страница: 43 / 217

Chapter 3 Basic Operations — Turning on/off the projector
ENGLISH - 43
1) Press
asqw
on the remote control to adjust the focus.
LENS
FOCUS
ADJUST
2) Press the <MENU> button on the remote control to perform rest of the initial setting.
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press
as
on the remote control to select the display language.
INITIAL SETTING
ENTER
SELECT
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
SUOMI
NORSK
Please select DISPLAY LANGUAGE.
SET
1/4
2) Press the <ENTER> button on the remote control to perform next initial setting.
Initial setting (installation setting)
Set [PROJECTION METHOD] and [VERTICAL FLIP] depending on the installation conditions. Refer to
“Installation form” (
x
page 31) for details.
Set [HIGH ALTITUDE MODE] to [HIGH1] when using the projector at altitude between 1 000 m (3 281') and
2 000 m (6 562') above sea level, and set [HIGH ALTITUDE MODE] to [HIGH2] when using the projector at
altitude between 2 000 m (6 562') and 2 700 m (8 858').
Once the initial setting is completed, the settings for each item can be changed from the [SETUP] menu.
1) Press
as
on the remote control to select an item.
2) Press
qw
on the remote control to switch the setting.
2/4
< >
INITIAL SETTING
PROJECTION METHOD
OFF
FRONT
VERTICAL FLIP
MENU SELECT CHANGE
SET
OFF HIGH ALTITUDE MODE
Change PROJECTION METHOD or VERTICAL FLIP if the
screen display is upside down or inverted.
SWITCH TO HIGH ALTITUDE MODE "HIGH1" IF BETWEEN
1000m~2000m(3281Ft~6562Ft). SWITCH TO HIGH
ALTITUDE MODE "HIGH2" IF BETWEEN
2000m~2700m(6562Ft~8858Ft).
ENTER
3) Press the <ENTER> button on the remote control to perform next initial setting.