89
Adjustments and Settings for Recording
:
Selection of video output signals
A
d
ju
st
m
ents and
Sett
in
g
s for R
ecord
in
g
The MON OUT connector outputs HD SDI signals, down-
converted SD SDI signals, and analog signals.
In the MONITOR OUT item, set the video signal output from
the MON OUT connector. The MONITOR OUT item can be
selected from the <OUTPUT SEL> screen on the SYSTEM
SETTING page.
Set the signals output from the MON OUT connector in the
MONITOR OUT MODE item. The MONITOR OUT MODE
item can be selected from the <OUTPUT SEL> screen on
the SYSTEM SETTING page.
Use the MON OUT CHARACTER switch to set whether to
superimpose characters on the signals output from the MON
OUT connector.
ON:
Superimpose.
OFF:
Do not superimpose.
>
[MON OUT CHARACTER switch] (page 22)
However, the OUTPUT ITEM item sets details of the
characters to superimpose both on the output from the SDI
OUT connector, and that from the MON OUT connector. The
OUTPUT ITEM item can be selected from the <OUTPUT
SEL> screen on the SYSTEM SETTING page.
Settings of signals output from MON OUT connector
Item
Variable
range
Remarks
MONITOR OUT
HD SDI
SD SDI
VBS
Select the output signal format for the
MON OUT connector.
HD SDI:
output an HD SDI signal.
(1080i mode only)
SD SDI:
output an SD SDI signal.
VBS:
output a composite signal.
Item
Variable
range
Remarks
MONITOR OUT
MODE
MEM
CAM
Select the output signal for the MON
OUT connector.
MEM:
During EE such as recording,
video images taken by the
camera are output. In
playback mode, this is the
playback image.
CAM:
always the camera image.
MON OUT CHARACTER
switch
AJ-HPX3100G(VQT3A79)_E.book 89 ページ ２０１０年９月１７日 金曜日 午後９時２１分
