manualshive.com logo in svg

Panasonic P2HD AJ-HPX3100G, Руководство по эксплуатации

"Panasonic P2HD AJ-HPX3100G" - профессиональная видеокамера высокого разрешения. Чтобы узнать как использовать все ее функции, скачайте бесплатное руководство по эксплуатации на {веб-сайте}. Этот операционный мануал поможет вам максимально использовать потенциал этой камеры.

Поделиться
Скачать
background image

154

Maintenance and Inspections: Warning System

5. Image Sequence Error

Display window 
indication 

“E-40” appears in the time code display field.

WARNING lamp 

Blinks 4 times per second. 

Tally lamp

Blinks 4 times per second while recording 
continues. 

Viewfinder

The REC WARNING indicator lights up. 

Warning tone

Beeps 4 times per second. 

Warning 
description 

There are abnormal conditions in the image 
sequence of the 24P, 30P, or 25P mode.

Recording/
playback 
operation 

Images can be recorded and played back, 
but some frames may be dropped or the 
sequences of TC and UB may shift.

Countermeasures

Confirm the recording/playback operation 
after turning OFF the power supply once and 
then turning it on again. If the error is not 
corrected after executing this procedure, 
contact the dealer.

6. Corruption of Standard Signal

Display window 
indication 

“E-40” appears in the time code display field.

WARNING lamp 

Blinks 4 times per second. 

Tally lamp

Blinks 4 times per second. 

Viewfinder

The TEMPORARY PAUSE indicator lights up. 

Warning tone

Beeps 4 times per second while recording 
continues. 

Warning 
description 

Corruption in the input signals from the 
standard GENLOCK IN and SDI IN 
connectors means correct recording is not 
possible, and this has stopped. The clip will 
be divided. 

Recording/
playback 
operation 

When the signal returns to normal, recording 
will automatically start again. However, this 
will not automatically start when in 
INTERVAL REC mode or LOOP REC mode. 

Countermeasures

Please check the input signal from the 
GENLOCK IN connector or SDI IN connector. 
If errors continue, please contact your dealer. 

7. Recording Error

Display window 
indication 

“00:00:00:11” appears in the time code display 
field. Even after recording is stopped, this 
display continues to blink until the next 
operation is performed.

WARNING lamp 

Blinks 4 times per second while recording 
continues. 

Tally lamp

Blinks 4 times per second while recording 
continues. 

Viewfinder

The REC WARNING indicator lights up. 

Warning tone

Beeps 4 times per second while recording 
continues. 

Warning 
description 

This indicates a failure either in the P2 card 
recording or the recording circuit.

Recording/
playback 
operation 

The recording may stop or continue.

Countermeasures

Restart recording. Or, turn the power OFF and 
turn it ON again, before starting recording. If 
the recording cannot be performed normally, 
change the P2 card.

8. Number of Clips Exceeded

Display window 
indication 

“00:00:00:11” appears in the time code display 
field. Even after recording is stopped, this 
display continues to blink until the next 
operation is performed.

WARNING lamp 

Blinks 4 times per second while recording 
continues. 

Tally lamp

Blinks 4 times per second while recording 
continues. 

Viewfinder

The OVER MAX# CLIPS indicator lights up. 

Warning tone

Beeps 4 times per second while recording 
continues. 

Warning 
description 

This is displayed when attempting to record 
clips where the total quantity exceeds the 
upper limit (1000 pieces) for a single P2 card.

Recording/
playback 
operation 

Cannot record. Stops while recording.

Countermeasures

Insert a new P2 card or delete the  unwanted 
clips in the P2 card.

9. Low Wireless Signal Reception

Display window 
indication 

No display. 

WARNING lamp 

Blinks 4 times per second. (During pause and 
recording) 

Tally lamp

Blinks 4 times per second while recording 
continues. 

Viewfinder

The WIRELESS RF indicator lights up while 
recording continues. 

Warning tone

Beeps 4 times per second while recording 
continues. 

Warning 
description 

This error indicates poor wireless audio 
reception conditions. 

Recording/
playback 
operation 

Continues to operate without receiving the 
wireless microphone signal. 

Countermeasures

Check the microphone power supply and the 
reception status of the wireless receiver. 

10. Battery Nearly Empty

Display window 
indication 

One of the bars in the battery remaining 
indicator starts blinking. 

WARNING lamp 

Blinks once per second. 

Tally lamp

Blinks once per second. 

Viewfinder

The BATT LED blinks. 

Warning tone

Beeps 4 times per second. 

Warning 
description 

The battery is about to run out. 

Recording/
playback 
operation 

Continues to operate. 

Countermeasures

Replace the battery as required. 

AJ-HPX3100G(VQT3A79)_E.book  154 ページ  ２０１０年９月１７日　金曜日　午後９時２１分

Содержание P2HD AJ-HPX3100G

















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для P2HD AJ-HPX3100G

Quasar Palmcorder VM-L459 User Manual preview
Palmcorder VM-L459
Бренд: Quasar Страницы: 56
Sony VJBK1T Using preview
VJBK1T
Бренд: Sony Страницы: 2
Sony VX-1000 Operating Manual preview
VX-1000
Бренд: Sony Страницы: 6
Sony VX-2000 Operating Manual preview
VX-2000
Бренд: Sony Страницы: 11
Sony VX-2100 Manual preview
VX-2100
Бренд: Sony Страницы: 16
Sony XCG-C130 Technical Manual preview
XCG-C130
Бренд: Sony Страницы: 49
Sony Video8 Handycam CCD-FX340 Operation Manual preview
Video8 Handycam CCD-FX340
Бренд: Sony Страницы: 54
Sony XCG-CG160 Technical Manual preview
XCG-CG160
Бренд: Sony Страницы: 60
Sony Video8 Handycam CCD-FX410 Operation Manual preview
Video8 Handycam CCD-FX410
Бренд: Sony Страницы: 75
Sony Video8 Handycam CCD-FX510 Operation Manual preview
Video8 Handycam CCD-FX510
Бренд: Sony Страницы: 76
Sony Handycam DCR-DVD408 Specifications preview
Handycam DCR-DVD408
Бренд: Sony Страницы: 2
Sony Handycam DCR-DVD305 (Portuguese) Especificacoes preview
Handycam DCR-DVD305
Бренд: Sony Страницы: 1
Sony Handycam DCR-DVD301 Specifications preview
Handycam DCR-DVD301
Бренд: Sony Страницы: 2
Sony Handycam DCR-DVD300 Brochure preview
Handycam DCR-DVD300
Бренд: Sony Страницы: 2
Sony Handycam DCR-290E Brochure preview
Handycam DCR-290E
Бренд: Sony Страницы: 2
Sony Handycam CCD-TRV328 Specifications preview
Handycam CCD-TRV328
Бренд: Sony Страницы: 2
Sony Handycam CCD-V1 Operating Instructions Manual preview
Handycam CCD-V1
Бренд: Sony Страницы: 40
Sony Handycam CCD-TR91 Operation Manual preview
Handycam CCD-TR91
Бренд: Sony Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды