Panasonic P2HD AG-HPX610EJ Скачать руководство пользователя

Страница: 32 / 179

– 32 –

Chapter 3 Recording and Playback — P2 card

P2 card

Inserting a P2 card

NOTE

When using the camera for the first time, be sure to set the time

data beforehand. (page 31)

Set the <POWER> switch to <ON>.

Open the slot cover.

Slot cover

Insert a P2 card into the P2 card slot.

Insert the card until the eject button pops out.

Insert the card with the logo facing up.

Eject button

Press the eject button that pops up to the right.

When a P2 card is inserted, the P2 card access LED for the
appropriate slot indicates the status of the P2 card. (page 33)

P2 card access LED

Close the slot cover.

NOTE

To prevent cards from falling out, dust from entering and reduce

the risk of exposure to static electricity, close the slot cover

before moving the camera.

Be sure to format P2 cards only on a P2 device.

Removing a P2 card

Open the slot cover.

Raise the eject button.

Press in the eject button to remove the P2 card.

NOTE

After insertion, do not remove the P2 card while it is being

accessed or recognized (the P2 card access LED is flashing

orange). Doing so may result in a malfunction.

If the P2 card is removed while being accessed, [TURN POWER

OFF] is displayed on the viewfinder screen, the camera gives out

a warning indication by an alarm or <WARNING> lamp, etc. All P2

card access LEDs flash rapidly in orange, so, if this is the case,

turn off the power. (page 157)

If the P2 card is removed while being accessed, clips on it may

become irregular. Check the clips and restore them, if required.

(page 107)

If the P2 card being formatted is removed, formatting of the P2

card is not guaranteed. In this case, [TURN POWER OFF] is

displayed on the viewfinder screen displays. Turn off the power

then back on again, and reformat the P2 card.

If a P2 card is inserted while another card is being played back,

the inserted card is not recognized and the P2 card access LED for

that card does not light. P2 card recognition starts when playback

of the other card ends.

Even if a P2 card is inserted in a vacant card slot during recording,

the media may not be recognized immediately in the following

instance:

- Immediately after a pre-recording

The P2 card access LED can be set to off at all times at the

[ACCESS LED] item on the setting menu [OTHER FUNCTIONS]

screen. In this case, turn off the power before removing the card,

or, after the card is inserted or after operation (recording, playback,

etc.) has stopped, wait for the charging to complete before

removing the card.

If thumbnails are displayed, the thumbnail screen will be canceled

when the P2 card is removed.

Содержание P2HD AG-HPX610EJ




















































































































































































Результаты поиска

Содержание P2HD AG-HPX610EJ

Отзывы:

Похожие инструкции для P2HD AG-HPX610EJ

Бренды по названию

Популярные бренды

Panasonic P2HD AG-HPX610EJ, Руководство по эксплуатации

Результаты поиска

Содержание P2HD AG-HPX610EJ

Отзывы:

Похожие инструкции для P2HD AG-HPX610EJ

Бренды по названию

Популярные бренды