– 120 –
Chapter 7 Menu Operations — Menu list
Menu list
[SCENE FILE] screen
Item
Description of settings
Remark
LOAD/SAVE/INIT
Loads, saves, or initializes the setting value of the scene file assigned to the
current scene file number (one number among F1 to F6).
f
This setting change does not affect the scene files
other than the current scene file number.
f
This setting is not available when clip connection
is underway with one-clip recording.
[LOAD]
Loads data saved in the built-in memory of the camera.
[SAVE]
Saves the current value in the built-in memory of the camera.
[INITIAL]
Returns to the factory settings.
VFR (OP4)
Sets whether to allow variable frame rate (VFR).
f
This setting is not displayed when [SYSTEM
MODE] is [480i], [576i], and [1080-23.98PsF].
f
This setting is not available when [SYSTEM
MODE] is [1080i] and an item other than [60i] and
[50i] is selected at [CAMERA MODE].
f
This setting is not available when [REC SIGNAL]
is [SDI IN].
f
The screen may be disturbed momentarily when
switched to 24 frames.
f
This item can also be set on the [CAM03:SETUP]
screen of SmartUI
[ON]
Activates the variable frame rate.
[OFF]
Does not activate the variable frame rate.
FRAME RATE (OP4)
Selects shooting interval and exposure time when the [VFR] item is [ON] in [1080i]
and [720P].
[1080-59.94i]
Variable from [1] up to [30] frames (17 steps)
[1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [24], [25], [26],
[27], [28], [30]
[1080-50i]
Variable from [1] up to [25] frames (14 steps)
[1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [23], [24], [25]
[720-59.94P]
Variable from [1] up to [60] frames (25 steps)
[1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [24], [25], [26],
[27], [28], [30], [32], [34], [36], [40], [44], [48], [54], [60]
[720-50P]
Variable from [1] up to [50] frames (25 steps)
[1], [2], [4], [6], [9], [12], [15], [18], [20], [21], [22], [23], [24], [25],
[26], [27], [28], [30], [32], [34], [37], [42], [45], [48], [50]
SYNC SCAN TYPE
Selects the synchro scan display setting.
[sec], [deg]
SYNCHRO SCAN
Displays the synchro scan shutter speed used for TV screen shooting.
Continuous pressing of the jog dial button turned up or down will accelerate the
speed to change the setting value. (page 56)
r
When [SYNC SCAN TYPE] is [sec]
[60i], [60P]
[1/60.0] to [1/249.8] seconds
[30P]
[1/30.0] to [1/249.8] seconds
[24P]
[1/24.0] to [1/249.8] seconds
[50i], [50P]
[1/50.0] to [1/250.0] seconds
[25P]
[1/25.0] to [1/250.0] seconds
r
When [SYNC SCAN TYPE] is [deg]
When the [VFR] item is [OFF]
Can be set with [3d] to [360d], and [0.5d] steps.
When the [VFR] item is [ON] (OP4)
Setting of the [FRAME RATE] item is more than 12P
Can be set with [3d] to [360d], and [0.5d] steps.
Setting of the [FRAME RATE] item is less than 12P
Can be set with [3d] to [22.5d], and [0.5d] steps.
[45d], [90d], [180d], [360d]
DETAIL LEVEL
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
[
−
7] ... [0] ... [
+
7]
V DETAIL LEVEL
Adjusts the level of outline correction in the vertical direction.
[
−
7] ... [0] ... [
+
7]
DETAIL CORING
Adjusts the level of noise reduction of the detail signal.
[
−
7] ... [0] ... [
+
7]
f
Setting in the
−
direction results in a clearer image, but increases noise slightly.
f
Setting in the
+
direction reduces noise.
CHROMA LEVEL
Adjusts the chroma level.
[
−
7] ... [0] ... [
+
7]
CHROMA PHASE
Makes fine adjustments to the chroma phase.
[
−
7] ... [0] ... [
+
7]
COLOR TEMP Ach
Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
[
−
7] ... [0] ... [
+
7]
COLOR TEMP Bch
Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
[
−
7] ... [0] ... [
+
7]
indicates the factory setting value of scene file number F1.
