Panasonic P2HD AG-HPX610EJ, Руководство по эксплуатации

Страница: 125 / 179

– 125 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
PREREC MODE Sets the pre-recording mode. (page 41)
[ON], [OFF]
f
This setting is not available in the following cases:
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is set to [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
- The [REC FUNCTION] item is set to other than
[NORMAL].
ONE CLIP REC Sets one-clip recording mode. (page 43)
[ON], [OFF]
f
This setting is not available in the following cases:
- The [REC FUNCTION] item is other than
[NORMAL].
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
START TEXT MEMO Sets the function that automatically adds a text memo at recording start position
each time recording is started.
[ON], [SHOOT INFO], [OFF]
f
This setting is not available when the [REC
FUNCTION] item is other than [NORMAL].
f
Text memos added when the [START TEXT
MEMO] item is [ON] or [SHOOT INFO] indicate
the recording start position.
In addition, when [SHOOT INFO] is selected, the
camera setting information ([F.RATE]/[SHTR]/
[IRIS]/[GAIN]/[ND]/[ZOOM]/[EXT.]/[FOCUS]/
[GAMMA]/[CC]) is added to this text memo.
To record text memos as character information,
refer to “Setting clip metadata” (page 108).
TC MODE Sets count compensation for the built-in time code generator of the camera.
(page 66)
f
This setting is not available when activating in
[24P], [24PA], or [24PN]. Counting is always
performed in the non-drop frame mode.
[DF] Counts in drop frame mode.
[NDF] Counts in non-drop frame mode.
UB MODE Sets the content to be recorded in user bits. (page 64)
[USER], [TIME], [DATE], [EXT], [TCG], [FRM.RATE]
indicates factory setting values.
[AUDIO SETUP] screen
Item Description of settings Remark
FRONT VR CH1 Sets whether to enable or disable front volume for CH1 input.
f
When audio channel 1 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
[FRONT] Front volume is enabled when CH1 is front microphone input.
[W.L.]
Front volume is enabled when CH1 is wireless input.
[REAR] Front volume is enabled when CH1 is rear input.
[ALL] Front volume is enabled when CH1 is either front, wireless, or
rear.
[OFF] Front volume is disabled for CH1.
FRONT VR CH2 Sets whether to enable or disable front volume for CH2 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 2 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
FRONT VR CH3 Sets whether to enable or disable front volume for CH3 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 3 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
FRONT VR CH4 Sets whether to enable or disable front volume for CH4 input.
The setting contents are the same as [FRONT VR CH1].
[OFF]
f
When audio channel 4 is set to [AUTO] at the
[LVL] item on the [AUD02:INPUT] screen of
SmartUI, front volume is disabled regardless of
the setting of this item since automatic adjustment
mode is used.
MIC LOWCUT CH1* Sets microphone low cut filter for CH1.
[FRONT] Works for front microphone input.
[W.L.] Works for wireless input.
[REAR] Works for rear microphone input.
[OFF] Off for any input.
MIC LOWCUT CH2* Sets microphone low cut filter for CH2.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
MIC LOWCUT CH3* Sets microphone low cut filter for CH3.
The setting contents are the same as [MIC LOWCUT CH1].
[OFF]
indicates factory setting values.