Panasonic Micro-Imagechecker PV310, Руководство пользователя

Страница: 109 / 363

101
Settin
g
Checkers
Cha
p
ter 6
6.7.3 Setting Procedure
Inspection Conditions:
1. Proceed up to “Configure the setting for preprocessing” at the third step following section 6.2.1.
2. Set “Area Size Adj.” as necessary.
The “Area Size Adj.” function can expand or contract the inspection area to fit the object (see page 85.
3. Select "Direction".
Select "Horizontal "/ "Vertical" from the submenu. (When “Area Shape” is set to “Line”, this menu option is
deactivated.)
Direction Description Example
"Horizontal"
scanning Detects edges from the start point toward
the end point in the horizontal direction
(Horizontal direction scans on the monitor
screen)
"Vertical"
scanning Detects edges from the start point toward
the end point in the vertical direction
(vertical direction scans on the monitor
screen)
4. Select "Scan Method.
Select either "Single" or "Projection".
Selecting "Projection" enables you to check a processed projection
image. To do this, select "Projection Image" at the bottom of the menu.
5. Select "Position Adj." and press the ENTER key.
When you execute position/rotation adjustment checkers specify the
checker numbers.
But, the number of position/rotation-adjustment-referred checkers
must be lower than the number of the rotation-adjustment-referring
checker. (See page 140 for Position Adjustment and page 152 for
Rotation Adjustment)
6. Select "Edge Condition".
Select "Light-Dark", "Dark-Light" or "Both" from the submenu.
Light ->Dark Detects a pixel that changes from high gray to
low gray (or from light to dark)
Dark-> Light Detects a pixel that changes from low gray to
high gray (or from dark to light)
Both Detects a pixel that changes both from light to
dark and from dark to light.