Panasonic M24PWR, Руководство по эксплуатации

Страница: 37 / 235

37
4.6.3.b. SNMP Trap Receiver Configuration
On the SNMP Configuration Menu screen, pressing "T" opens the SNMP
Trap Receiver Configuration Menu screen, as shown in Fig. 4-6-6. On this
screen, you can set the SNMP Trap sending settings.
Fig. 4-6-6 SNMP Trap Receiver Configuration
Screen Description
Trap Receiver
List: Displays the IP address and the community name for the current trap
receiver.
No.
Displays the entry number for the trap receiver.
Status Displays the trap sending setting.
Enabled
Sends traps.
Disabled Does not send traps.
Type Displays the Trap type.
V1
Sends SNMPv1 traps.
V2 Sends SNMPv2 traps.
IP Address Displays the IP address of the trap receiver.
Community Displays the current community name, set for sending
traps.
PN23249K/PN23249A Local Management System
SNMP Configuration -> SNMP Trap Receiver Configuration Menu
Trap Receiver List:
No. Status Type IP Address Community
---- -------- ----- --------------- ----------------------------
1 Disabled v1 0.0.0.0
2 Disabled v1 0.0.0.0
3 Disabled v1 0.0.0.0
4 Disabled v1 0.0.0.0
5 Disabled v1 0.0.0.0
6 Disabled v1 0.0.0.0
7 Disabled v1 0.0.0.0
8 Disabled v1 0.0.0.0
9 Disabled v1 0.0.0.0
10 Disabled v1 0.0.0.0
-------------------------------- <COMMAND> -----------------------------------
Set Receiver [S]tatus Set Receiver [I]P In[d]ividual Trap Config
Set Trap [T]ype Set Receiver [C]ommunity [Q]uit to previous menu
Command>
Enter the character in square brackets to select option