Panasonic M24PWR, Руководство по эксплуатации

Страница: 119 / 235

119
4.7.4.h. Designated Topology Information
On the Multiple Spanning Tree Configuration Menu, pressing "I" opens the
Designated Topology information screen, as shown in Fig. 4-7-23. This
screen displays configuration information of the spanning tree for each
port.
Fig. 4-7-23 Designated Topology Information
Screen Description
Port Displays the port number.
Trunk Displays the group number (key) of the trunk if trunking is set.
Link Displays the state of link.
UP
Link is established normally.
DOWN Link is not established.
Cist Desig.Root Displays root bridge ID.
Cist Desig.Cost Displays cost under transmission.
Cist Desig.Bridge Displays bridge ID of a designated bridge.
Cist Desig.Port Displays port ID of a designated port. (Port ID is a combination of
port priority value and port number.)
Available commands are listed below.
N Display the next page.
Press "N" to change the display to the next page.
P Display the previous page.
Press "P" to change the display to the previous page.
Q Return to the previous menu.
PN23249K/PN23249A Local Management System
Multiple Spanning Tree Configuration -> Designated Topology Information
Cist Cist Cist Cist
Port Trunk Link Desig. Root Desig. Cost Desig. Bridge Desig. Port
---- ----- ---- ----------------- ----------- ----------------- -----------
1 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 01
2 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 02
3 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 03
4 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 04
5 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 05
6 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 06
7 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 07
8 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 08
9 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 09
10 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0A
11 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0B
12 --- Down 8000 00C08Fxxxxxx 0 8000 00C08Fxxxxxx 00 0C
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option