15
Preparation/Basic
(ENG) DVQX1761
3
Insert the battery
E
in the correct direction.
• The [CHARGE] indicator
F
lights up and charging begins.
∫
About the [CHARGE] indicator
• When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge the battery again
in an ambient temperature of between 10
o
C and 30
o
C (50
o
F and 86
o
F).
– The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
• Always use genuine Panasonic batteries (DMW-BLC12E).
• If you use other batteries, we cannot guarantee the quality of this product.
• Being careful about the battery orientation, insert all the way until you hear a locking sound and
then check that it is locked by lever
A
.
∫
To remove
Push the lever
A
in the direction of the arrow to remove.
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear
before removing the battery.
• Remove the battery after use.
¥
Do not use any other USB connection cables except the supplied one.
¥
Do not use any other AC adaptors except the supplied one.
¥
The AC adaptor (supplied) and USB connection cable (supplied) are for this camera only. Do
not use them with other devices.
On:
Charging.
Off:
Charging has completed.
(After charging is complete, disconnect the AC adaptor (supplied) from
the power outlet and remove the battery.)
Battery Insertion
DC-G90-G91EB-DVQX1761_eng.book 15 ページ ２０１９年４月２日 火曜日 午後４時５９分
