246
Wi-Fi/NFC
∫
Describing method
When “select [Smartphone]”, etc. is described in a step,
perform any of the following operations.
• The camera cannot be used to connect to a public wireless LAN connection.
• Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
• We strongly recommend that you set an encryption to maintain information security.
• It is recommended to use a fully charged battery when sending images.
• When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted. (A message such as [Communication error] is displayed.)
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
• Pictures may not be completely sent depending on radio wave conditions. If the connection is
terminated while sending pictures, pictures with missing sections may be sent.
• Do not remove the memory card or battery or move to an area without any reception
while sending images.
• The monitor display may become distorted for an instant while connected to the service,
however this will not affect the image being sent.
In these operating instructions, steps for setting a menu item are described as follows.
[Wi-Fi]
>
[New Connection]
>
[Remote Shooting & View]
Touch operation:
Touch [Smartphone].
Button operation:
Select [Smartphone] with the cursor
button, and then press [MENU/SET].
DMC-G6PDF-VQT4Z82_mst.book 246 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
