139
Recording
Taking pictures by using the flash
Applicable modes:
∫
Open/Close the built-in flash
Taking a picture using the flash becomes
possible by opening the built-in flash.
A
To open the flash
Press the flash open button.
B
To close the flash
Press the flash until it clicks.
• Forcibly closing the flash can damage the
camera.
• The flash setting is fixed to [
Œ
] while the flash
is closed.
• Be careful not to catch a finger when closing a flash bulb.
∫
The available flash range
If the distance to the subject is close when taking a picture using a flash, part of the
recorded image becomes dark because the light of flash is blocked by the lens or it
becomes out of flash range. Check the distance to the subject when taking a picture. The
distance at which light from the flash is blocked by lens, and the distance to which light
from the flash is delivered vary depending on the lens used.
When the interchangeable lens (H-PS14042) is used
Available flash range
Wide
Tele
[AUTO] in
[Sensitivity]
30 cm (0.98 feet) to 9.4 m (31 feet)
30 cm (0.98 feet) to 5.9 m (19 feet)
When the interchangeable lens (H-FS14140) is used
Available flash range
(When the aspect ratio is [4:3].)
Wide to 17 mm
18 mm
Tele
[AUTO] in
[Sensitivity]
Vignetting effect occurs
due to the light of the
flash.
1.0 m (3.3 feet) to
8.9 m (29 feet)
50 cm (1.6 feet) to
5.9 m (19 feet)
DMC-G6PDF-VQT4Z82_mst.book 139 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
