23
Preparation
Changing the Lens
By changing the lens, you will increase your picture taking-options and further your
enjoyment of the camera. Change the lens using the following procedure.
• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to
the lens.
Align the lens fitting marks
A
and then rotate the lens in the direction of
the arrow until it clicks.
• Do not press the lens release button
B
when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
• Be sure to remove the lens cap when recording.
• Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
• To prevent dust or debris from adhering to internal parts of the
camera body, fit the body cap or a lens to the mount on the camera
body.
• To prevent scratching of the contact points, fit the lens rear cap to the
lens when it is unattached or fit the lens to the camera body.
• It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying.
Attaching the lens
Preparations: Remove the lens rear cap from the lens.
• If the body cap is fitted to the camera, remove it.
DMC-G6PDF-VQT4Z82_mst.book 23 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
