Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 130 / 334

130
4-4-2 Operator Adjustable Items
Select the items to give the permission of setting change in the environment setting screen of “4-16-1 Display Setting
(Environment 1)” (P.253).
Description of Changeable Items
X/Y Offset:
Sets X and Y offset values.
Setting Range
-45.000 to +45.000 mm (LP-V10)
-55.000 to +55.000 mm (LP-430 / LP-420 / LP-410)
-80.000 to +80.000 mm (LP-435 / LP-425 / LP-V15)
-27.500 to +27.500 mm (LP-431 / LP-421 / LP-411 / LP-W052)
Laser Power:
Sets the laser power.
Setting Range 0.5 to 100.0
Scan Speed:
Marks value of scan speed.
Setting Range
1 to 12000 mm/s (LP-430 / LP-420 / LP-410 / LP-435 / LP-425 /LP-V10 / LP-V15)
1 to 6000 mm/s (LP-431 / LP-421 / LP-411 / LP-W052)
Pulse Cycle (Only LP-V series):
Sets the laser pulse cycle.
Setting Range 10.0 to 50.0
m
s
Line Speed / Line Speed Fine Adjustment:
Sets the line speed for marking to flying object.
Displayed with the setting of the marking to flying object without encoder. The fine adjustment of the line speed can be
set after starting the marking in run mode.
Setting Range
0.060 to 240.000 m/min (LP-430 / LP-420 / LP-435 / LP-425 / LP-V10 / LP-V15)
0.060 to 170.000 m/min (LP-410)
0.060 to 120.000 m/min (LP-431 / LP-421 / LP-W052)
0.060 to 85.000 m/min (LP-411)
FILE:
Selects file No. Refer to “4-7-2 Change File No.” (P.141) for setting method.
CHARACTER :
Set the marking characters in the lines that are permitted in the environment setting. Refer to “4-8-2 Character Input” (P.148)
for setting method.
SAVE:
Overwrites and registers the items changed on operator adjustment screen.
Refer to “4-7-3 Save” (P.142).
Laser Check :
Radiates the laser to the center of marking field by laser power set.
Refer to “Laser Check” (P.131)
+Y
-Y
+X
-X
ME-LP400V-OP-6