Panasonic LP-V Series, Руководство по эксплуатации и обслуживанию

Страница: 188 / 334

188
4-10-4 Bar Code Condition
Notice
• When marking bar code or 2D code, read the laser-marked code with the code reader, and check the content of the
marked code that is output from the code reader is coincident with the original bar code or 2D code without fail.
• Since the marking to the flying object is affected by vibration or line speed easily, marking and reading 2D code or bar
code to the flying object might become unstable. Therefore, when marking 2D code or bar code to the flying object,
check the marking and reading state of the marked code on the flying object sufficiently.
⿎ Common setting for bar code and 2D code
1
3
4
7
8
2
5
6
Description
1 Bar Code No. :
Specifies up to 8 codes per one registered file.
Setting Range 0 to 7
2 Type :
Select the code type.
Press code name to display the Bar Code selecting screen. For the selectable code type, refer to “Code Type and
Code Data” (P.190).
3 Center Position X/Y or X/Y Position:
Specifies the center position of the code.
Setting Range
-45.000 to +45.000 mm (LP-V10)
-55.000 to +55.000 mm (LP-430 / LP-420 / LP-410)
-80.000 to +80.000 mm (LP-435 / LP-425 / LP-V15)
-27.500 to +27.500 mm (LP-431 / LP-421 / LP-411 / LP-W052)
4 Tilt Angle or Rotation Angle:
Sets the angle of the code.
Setting Range -180.00 to +180.00 degree
ME-LP400V-OP-6