Panasonic LP-S Series, Руководство по обслуживанию

Страница: 94 / 174

94
3-3-4 Signals on I/O connector
„
List of signals
No. Name
1 IN COM.
Input common
2 SET
Set input
3 D0
4 D1
5 D2
6 D3
7 D4
8 D5
9 D6
10 D7
11 D8
12 D9
13 D10
14 D11
15 D12
16 D13
17 D14
18 D15
19 RESERVE
System reservation
20 SELECT 0
Select 0 input
21 SELECT 1
Select 1 input
22 SELECT 2
Select 2 input
No. Name
23 TIME HOLD
Time hold input
24 RESERVE
System reservation
25
26
GUIDE
Guide laser input
27 RESERVE
System reservation
28
29
30
31
GAP
Date gap output
32 CEND 0 / 4
Counter 0 or 4 end output
33 CEND 1 / 5
Counter 1 or 5 end output
34 CEND 2 / 6
Counter 1 or 5 end output
35 CEND 3 / 7
Counter 3 or 7 end output
36 SET OK
Setting completion output
37 OUT COM.
Output common
ワㄐㄕㄊ㄄ㄆ
• IN COM. and OUT COM. on the I/O connector are connected with IN COM. and OUT COM. on the Input/Output terminal
internally. If the power supply for I/O connector and for Input/Output terminal are set inversely, the short out might be
occurred, and laser marker might be broken. Be sure to check the wiring before starting the laser marker without fail.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For the pin arrangement of the I/O connector, refer to “3-3-2 Terminal and connector for I/O” (P.87).
• You can check the I/O connection status and its operation using “I/O check monitor” and “Output simulation” functions.
Refer to Operation Manual for details.
ME-LPS-SSM-8