Panasonic LP-S Series, Руководство по обслуживанию

Страница: 50 / 174

50
2-2-3 DIP switch
Set the operational options of the laser marker with the DIP switch
equipped on the controller rear side.
ワㄐㄕㄊ㄄ㄆ
• A plastic cover is installed on the DIP switch. Install this cover always
to avoid the dust penetration to the controller.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• The initial setting of all DIP switches is OFF.
• Turn OFF the power at DIP switch setting.
Item Description
No. 1 System reservation. Keep OFF state.
No. 2 Select the control method, I/O or command for some specific operations.
ON Control by serial communication commands for the following operations
• Laser pumping (LSR)
• Shutter control (SHT)
• Guide laser (GID)
• Laser check radiation (SPT)
• Laser power measurement (PWM)
• Power check (PWR)
• Test marking (TST)
OFF Control by I/O for the following operations
• Laser pumping
• Shutter control
• Guide laser radiation
No. 3 Select the ON/OFF of the buzzer sound to notify the alarm or warning occurrence.
ON Disables the buzzer sound for alarm or warning state.
OFF Enables the buzzer sound for alarm or warning state.
No. 4 Select the ON/OFF of the password lock to allow the settings of the screen. Refer to
“Operation manual” for the password settings.
ON Disables the password lock.
OFF Enables the password lock.
ON
OFF
Rear of controller
DIP switch
ME-LPS-SSM-8