Panasonic LJ-SK56A, Руководство по установке, Страница: 21 / 132

21
Installation Manual
■
Standard Installation Location for Lithium-ion Storage Battery System
4. Mounting of System and Battery
4-1. Location
The Lithium-ion storage battery system is a non-portable product suitable only for outdoor installation. Determine the
installation location in accordance with the conditions outlined in this manual. The Battery is only designed for
installation inside the system enclosure. Do not use it in other locations.
● Do not mount in a location that does not meet the criteria described below.
● Do not mount in places where there are high temperatures, or in the proximity of something that is burning.
● Do not mount in a location that cannot bear the weight of the product.
● Do not mount the product on a sloped surface.
● Do not install the battery anywhere else besides the inside of the product enclosure.
● The work must be performed by personnel.
● Do not attempt to mount the product in special locations listed below.
● Install in a place whereas the Rating Label can be seen.
Installation location Outdoor/Indoor*
Storage temperature range [°C] -20 to +40°C
Operating temperature range [°C]
0 to +40°C
(Discharging: -10 to 40°C)
Operating humidity [% RH]
0 to 90% RH
(No dew condensation)
Maximum atmospheric pressure/altitude Lower than 1000 m above sea level
Sunlight Protected from exposure to continuous direct sunlight.
* When the product is installed in the building or house, it is necessary to ensure all local building and regulations are complied with.
■
Guidelines How to Protect the Product from Direct Sunlight
x Enclosed locations with insufficient heat radiation. (Storage Battery Systems require free air to keep cool. Installation in confined/
■
Locations where Lithium-ion Storage Battery System cannot be Installed
x Locations where it will receive or be subject to the impact of continuous direct sunlight.
x Locations that exceed the operating temperature range.
x Locations where the sunlight hits directly in the north or west side of the buildings without roof (eaves).
* See "■ Guidelines how to protect the product from direct sunlight" below explanation.
x Rooms such as solariums and greenhouses.
x Locations on moving objects such as trailer houses or cruisers.
x Locations where strong
sunlight strikes during the day.
enclosed spaces such as garden sheds or in close proximity to other appliances (i.e. air conditioner) that have the potential of
impeding free air
is not permitted.)
x Locations where the product may potentially become buried in snow. (Install a roof or a fence if installing the product in
snowbound regions.)
x Locations where humidity, salinity, sulfur or nitrate concentration are constantly high.
x Locations where the required installation space is not available.
* See "■ Clearance space for the installation location" in the next page.
x Locations exposed to or which potentially could be exposed to excessive steam, oil vapour, smoke, dust, corrosive substances,
gases, chemicals, or exhaust gas from vehicles.
x Locations subject to extreme temperature (Where dew condensation occurs.)
x Locations with strict noise requirements. (Operational noise of 40dB or lower.)
x Locations subject to impacts, shocks or vibrations caused by such as vehicle passing, machine operating, dropping, kicking or
acting of vandalism.
x Locations in the proximity of equipment/devices that are susceptible to radio interference, or locations that are emitting powerful
radio waves.
x Locations unable to bear the weight of the product.
x Locations where concrete foundations or equivalent
materials cannot be laid.
x Regions where there is severe salt pollution.
x Locations where above sea level is below 0 m.
x On the upper
or the roof of the building.
When installing the north, put awning,
eaves or things to make shadow that not
exposed to sunlight during the daytime.
When installing the north-east or south-east, put awning,
eaves or things to make shadow that not exposed to
sunlight during the daytime.
When installing the north-west or south-west, put awning,
eaves or things to make shadow that not exposed to sunlight
during the daytime.
When installing the south, put awning or
eaves above the product.
When installing the east or west, put
awning, eaves or things to make shadow
that not exposed to sunlight during the
daytime.
ouse
orth
wning or
eaves
Battery
system
Shade
structure as
required
ouse
orth
wning or
eaves
Battery
system
Shade
structure as
required ouse
orth
wning or
eaves
Battery
system
Shade
structure as
required
ouse
orth
wning or
eaves
Battery
system
Shade
structure as
required
ouse
orth
wning or
eaves
Battery
system