Panasonic LJ-SK56A, Руководство по установке, Страница: 120 / 132

20
User's Manual
9. Settings Overview
Normal State (6-1)
Year
Year
* Make sure
that the
system is
not in
operation.
Automatic
Automatic
Date/Time Normal Display
Date/Time Display (7-1)
Month/Day
Hour/Minute
▪ Year→Month/Day→Hour/Minute
Each displayed for two seconds.
▪ Returns to normal state
automatically after the display.
Date/Time Setting (7-2)
Month
Day
Hour
Minute
Display of Setting
▪ There are three modes of view: Normal state, Remaining battery
level, and Operation mode.
▪ Press the "DATA (▲)" to change the display mode.
▪ The remaining battery level and operation mode views automatically
return to the normal state after five minutes of inactivity.
e.g. Operation mode
▪ In the normal state, you can view the operating status as
follows.
Stopped (Grid-connected)
Stopped (Stand-alone)
In Operation (Grid-connected)
In Operation (Stand-alone)
Error
Inspection Notice
Normal state
Displays the current status
Remaining Battery Level
Displays the Status of Battery
Operation Mode
Displays the current mode
[SELF]: Maximum self-
consumption mode
[ProG]: Programmed
charge/discharge time mode
[bu]: Back up mode
[rc]: Remote control mode
[dr]: DRED mode
Stopped via User’s command.
"
PF
"
will display.
If
"
ON/OFF (CANCEL)
"
is pressed for one
second, the system will start the stand-
alone operation.
The system in grid operation display
indicates charge or discharge power.
If "ON/OFF (CANCEL)" is pressed for
one second, the system will stop.
System shows the Inspection notice.
Period until inspection added.
(See 10-3)
The system in stand-alone operation,
indicates output power and
"
PF
"
.
If
"
ON/OFF (CANCEL)
"
is pressed for
one second, the system will stop.
The system has abnormally stopped
and indicates error mode (F/H/U/P/E)
and code.
▪ Press the "MENU (ENTER)" to change the
display:
Year→Month→Day→Hour→Minute
▪ Press "DATA (▲)" or "CLOCK (▼)" to
change the selected (i.e. blinking) value.
▪ The new setting values are displayed when
the setting is completed.
Stopped via User’s command.
If
"
ON/OFF (CANCEL)
"
is pressed for
one second, the system will start the grid
operation.
1 sec
3 sec
1 sec
Automatic
Automatic