Panasonic LJ-SK56A, Руководство по установке, Страница: 112 / 132

12
User's Manual
after five
6. Display Modes
6-1 Normal State
• This product has the following three mode views: Normal state, Remaining battery level, and Operation
mode.
• The Normal state displays the operating status of the system (stopped, grid operation, Stand-alone operation, etc.)
as well as error codes in the event of system problems.
• The Remaining battery level displays the current remaining capacity of the storage battery.
• The Operation mode view displays the currently selected operation mode (Maximum self-consumption mode /
Programmed charge/discharge time mode / Stand-alone mode).
• Press "DATA (▲)" to switch between the display modes.
*
*
Remaining battery level and Operation mode views automatically return to the Normal state minutes of
inactivity.
Depending upon the battery’s condition the battery might not be able to be discharged down to 0%.
* Order to carry out the re-calculation of the remaining amount of the battery, there is a case where the value of the remaining
amount is not continuously changed.
* The mode views can be switched while the system is operating or stopped.
Normal state Remaining battery level Operation mode
Display of the status of battery SELF : Maximum self-consumption mode
ProG : Programmed charge/discharge
time mode
bu : Back-up mode
rc : Remote control mode
dr : DRED mode
The following information is displayed in the normal state:
Stopped (Grid-connected)
Stopped via User’s command.
If "ON/OFF (CANCEL)" is
pressed for one second,
the system will start the grid
operation.
Inspection Notice
System shows the Inspection
notice. Period until inspection
added.
(See 10-3)
Stopped (Stand-alone)
Stopped via User’s command.
"PF" will display.
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will start the
stand-alone operation.
In Operation
(Stand-alone)
The system in stand-alone
operation, indicates output
power and "PF".
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will stop.
In Operation (Grid-connected)
The system in grid operation
display indicates charge or
discharge power.
If "ON/OFF (CANCEL)" is
pressed for one second, the
system will stop.
Error
The system has abnormally
stopped and indicates error
mode (F/H/U/P/E) and code.