![background image](http://html.mh-extra.com/html/panasonic/kx-vc500/kx-vc500_user-manual_262535098.webp)
Message
Cause and Solution
Invalid DNS Server Address.
•
The IP address contains an invalid value.
→
Enter the IP address correctly. The correct format is
XXX.XXX.XXX.XXX (dotted format decimal notation).
If the IP address contains 1 or 2 digit numbers, enter these numbers as
they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
Connection will be closed in
n
seconds.
Press "YES" to continue.
Note
•
The message first
appears when one
minute remains and
"60"
is displayed for
n
. Then, the
remaining time starts
to decrease.
•
The time set for
"Call Limit time"
has one minute remaining.
(Page 64)
→
If you select
"Yes"
, you can extend the call limit time for the amount
set for
"Call Limit time"
. If you select
"No"
, the call is disconnected.
Miscellaneous
Problem
Cause and Solution
"Safe Mode" is displayed on
the screen.
•
A standard definition (640
´
480p, 720
´
480p) video camera signal has
been detected.
→
Disconnect the video camera from the KX-VC500, and reset the
KX-VC500 by turning off its power, then turning it back on. Check to
make sure the video camera’s resolution is set to HD (1920
´
1080i),
and then connect the video camera to the KX-VC500 again.
•
A standard definition (640
´
480p, 720
´
480p) display signal has been
detected.
→
Disconnect the display from the KX-VC500, and reset the KX-VC500
by turning off its power, then turning it back on. Make sure to connect
a HD (1920
´
1080i) display to the KX-VC500.
•
The field frequency of the video camera or display you are using is
different from the field frequency setting of the KX-VC500.
→
Use a video camera or display that has the same field frequency as the
KX-VC500. For details, contact your dealer.
98
User Manual
Additional Information
Содержание KX-VC500
Страница 101: ...User Manual 101 Notes ...