Panasonic KX-VC500, Руководство пользователя

Страница: 94 / 102

If These Messages Appear
Message Cause and Solution
Call FAILED. Encryption
settings (On/Off) must match.
Please change the encryption
setting on one side and try
again. •
The encryption settings do not match those of the other party in a video
conference call.
→
Change the encryption settings to match those of the other party.
(Page 64, Page 72)
Call Failed due to wrong
encryption password. Please
contact your installer. •
The encryption password settings do not match those of the other party
in a video conference call.
→
Contact your dealer.
Check the Main Camera
connection. •
A cable or cord is not properly connected.
→
Check that all cables to the KX-VC500 are connected properly.
(Page 15)
•
The signal input from the main video camera is invalid.
→
A valid signal cannot be received from the connected main video
camera. Contact your dealer.
Unable to register, the contact
list is full. •
The contact list has reached its maximum capacity.
→
Delete unneeded contacts. (Page 59)
Invalid IP Address. •
The format of the entered IP address is invalid.
→
Enter the IP address correctly, in the format XXX.XXX.XXX.XXX
(decimal values separated by periods). For values of only 1 or 2 digits,
enter these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
Invalid Subnet mask. •
The input subnet mask is invalid.
→
Enter a valid subnet mask.
Invalid Default Gateway. •
The input default gateway is invalid.
→
Enter a valid default gateway.
Invalid Date/Time. •
Enter a date within the valid parameters.
→
Enter a date between January 1, 2009, and December 31, 2035.
PC is not connected.
Check connection. •
A cable or cord is not properly connected.
→
Check that all cables to the KX-VC500 are connected properly.
(Page 49)
•
The computer is not turned on.
→
Turn on the computer.
•
The computer is not set to output from its external monitor video out
port.
→
Change the computer’s settings so that video is output from the external
monitor port.
94 User Manual
Additional Information