4.5 Example of How to Make a Site Map
1.
Write down the MAC address of each CS on the map. (The MAC address is written on the rear side of
each CS.)
In case of network trouble, you can confirm which CS is not connected using the map.
Example of Site MAP (1)
(CS MAC addresses)
CS6
CS7
CS1
CS8
CS2
CS5
CS4
CS3
CS9
MAC address5
MAC address4
MAC address6
MAC address1
MAC address7
MAC address8
MAC address2
MAC address3
MAC address9
PoE Hub
2.
Write down the radio signal values (RSSI and Error Rate) around the next CS location and near important
places such as meeting rooms, on the map.
You can use this as a guide when changing the location of the CS.
Example of Site MAP (2)
(Radio signal conditions)
c
CS
coverage area
Power
Source
CS Area Check using PS
CS2
(Location2)
٨
CS2_Point1
RSSI : 10
Error : 01%
CS1
(Location1)
٨
CS1_Point3
RSSI : 10
Error : 01%
٨
CS1_Point4
RSSI : 12
Error : 01%
٨
CS1_Point1
RSSI : 10
Error : 01%
٨
CS1_Point2
RSSI : 11
Error : 01%
٨
CS2_Point2
RSSI : 10
Error : 02%
Installation Guide
41
4 Deployment Procedure
