Configuring Air Synchronisation Settings
Follow the procedure below to change the SIP-CS status to
Master
.
1.
In the
System
tab, select
Air Settings
.
2.
Select an Air Sync Group. (Group 1 must be selected for the Super Master CS.)
3.
In
CS Class
, select
Master
.
4.
Enter the IP address of the Super Master CS in
IP Address
. (This step can be omitted for the Super Master
CS.)
5.
Click
Save
.
The SIP-CS will restart automatically.
The SIP-CS is now set as an Air Sync Master CS. You may exit Site Survey Mode.
Changing the Administrator Password
Note
This setting is required only for the Super Master CS.
1.
In the
System
tab, select
Administrator Password
.
2.
Enter the default password in
Current Password
.
3.
Enter a new password in
New Password
.
4.
Enter the new password again in
Confirm New Password
.
5.
Click
All Save
.
44
Installation Guide
4 Deployment Procedure
