Registering SIP-CSs to the Air Sync Master CS (Air Sync Group 1)
1.
In the
System
tab, select
CS Management
.
2.
Select the number of SIP-CSs to register newly from the
Number of CS
pull-down menu.
3.
Click
Start CS Registration
.
4.
Click
OK
.
All the SIP-CSs on the LAN will be registered, and then displayed in
CS Registered List
.
Note
•
After clicking
Start CS Registration
, when the number of registered SIP-CSs reaches the number
specified in
Number of CS
, "Complete" is displayed and registration stops automatically.
•
Click
Stop CS Registration
to quit registration.
•
If you want to register all SIP-CSs in step 2, select the maximum number of SIP-CSs. In this case, after
the detected SIP-CSs have been registered, wait 5 minutes for the timeout display or click
Stop CS
Registration
.
•
After registration, check the
CS Registered List
to confirm that the SIP-CSs have been registered.
Notice
You cannot register the following SIP-CSs:
•
SIP-CSs that are not turned on
•
SIP-CSs that are not connected to the network
•
SIP-CSs for which no IP address has been set
•
SIP-CSs that cannot receive radio signals from the Air Sync Master CS
Registering SIP-CSs to the Air Sync Master CS (Air Sync Groups 2–8)
1.
In the
System
tab, select
CS Management
.
2.
Select an
Air Sync Group
.
3.
Select the number of SIP-CSs to register from the
Number of CS
pull-down menu.
4.
Click
Start CS Registration
.
5.
Click
OK
.
Note
•
At first, the
CS Registered List
for Air Sync Groups 2–8 is blank.
Installation Guide
47
4 Deployment Procedure
