Assigning IP Address Information
The Super Master CS must have a static IP address. Follow the procedure below to configure static IP address
information. (The following procedure can be omitted for Air Sync Groups 2–8.)
1.
In the
Network
tab, select
Basic Network Settings
.
2.
In
Connection Mode
, select
Static
.
3.
Enter the IP address of the Super Master CS in
Static IP Address
.
4.
Enter the subnet mask in
Subnet Mask
.
5.
Enter the IP address of the default gateway in
Default Gateway
.
6.
Enter the IP address of the primary DNS server in
DNS1
.
7.
Enter the IP address of a secondary DNS server in
DNS2
.
8.
Click
Save
.
Note
•
After saving changes on the
Basic Network Settings
screen, the changed settings will be applied
when
Complete
appears after clicking
Save
.
•
The IP addresses of the SIP-CSs may change if changes are made on the
Basic Network Settings
screen. In this case, log in to the Web user interface again using the newly assigned IP address for
the SIP-CS. In addition, changing the IP address of the PC that is connected to the SIP-CS may be
required.
Installation Guide
43
4 Deployment Procedure
