2.5 Installing Optional Cards in the KX-TVM50
10
Getting Started
2.5
Installing Optional Cards in the KX-TVM50
Follow these steps if you plan to install an optional 2-Port Hybrid Expansion Card (KX-TVM502) or
LAN Interface Card (KX-TVM594) in the KX-TVM50.
Installing a 2-Port Hybrid Expansion Card
1.
Position the front of the card so that the jacks fit in the open slot. Holding the card firmly in place,
lower the other end of the card so that the card's hole fits over the extension bolt.
CAUTION
When installing optional cards, do not put pressure on the main board. Doing so may result in
damage to the VPS.
2.
Insert and tighten the screws as shown.
Note
•
The KX-TVM502 operates at SELV.
2
1
Extension Bolt
Screw
